RFID & Wireless Modules
-
RFID & Wireless Modules
3.3V Adapter Board for NRF24L01 Wireless Module
₹36.00 Add to cartSpecifications of 3.3V Adapter Board for NRF24L01 Wireless Module:
Input Voltage: 5V DC
Output Voltage: 3.3V DC (regulated)
Output Current: Up to 800mA
Voltage Regulator IC: AMS1117-3.3
Compatible Module: NRF24L01 Wireless Transceiver
Dimensions: Approx. 26mm x 15mm
Interface: 8-pin header for NRF24L01 -
RFID & Wireless Modules
Ai Thinker LoRa Series Ra-02 Spread Spectrum Wireless Module Original
₹500.00 Add to cartSpecifications:
LoRa â„¢ spread spectrum modulation technology
Super-far-distance communication 15KM
+20dBm-100mW voltage constant when the RF power output
High sensitivity: low to -148dBm
Half duplex SPI communication
Programmable bitrates up to 300kbps
Supports FSK, GFSK, MSK, GMSK, LoRa â„¢ and OOK modulation
127dB RSSI dynamic range
Automatic RF signal detection, CAD models and ultra high-speed AFC
With the CRC, up to 256 bytes of packet engine
Small double stamp hole size SMD package
Shielding shell
IPEX external antenna (Ra-02) -
RFID & Wireless Modules
HC-05 6pin Bluetooth Module with Button
₹280.00 Add to cartSpecifications:
Bluetooth protocol: Bluetooth Specification v2.0+EDR.
Frequency: 2.4GHz ISM band.
Modulation: GFSK(Gaussian Frequency Shift Keying).
Emission power: =4dBm, Class 2.
Sensitivity: =-84dBm at 0.1% BER. -
RFID & Wireless Modules
HM-10 Bluetooth Module – AT-09 Bluetooth 4.0 UART Transceiver Module CC2541
₹311.00 Add to cartFeatures:
Bluetooth Protocol Specification: Bluetooth Specification V4.0 BLE
Supported USB Protocol: USB V2.0
Operating Frequency: 2.4GHz ISM band
Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
Transmitting Power: ≤4dBm
Sensitivity: ≤-84dBm at 0.1% BER
It’s easy to use and completely encapsulated.
You can set it as slave or master.
You can use AT command set the baud rate
Coverage up to 60 meters.
Built-in PCB antenna.
UART design.
Support bridge direct-driven mode simultaneously (no need for extra CPU).
20ms connection interval (default), quick to connect; Support AT instruction, to modify the baud rate of the serial port, gain MAC address and modify module name.
Support AT instruction, to adjust the Bluetooth connection interval and control the forwarding rate (dynamic power consumption adjustment).
Support APP; IO expansion.
2 channel ADC input (14 bit).
4 channel PWM (120Hz) output.
The RSSI successive acquisition, auto read, and notification to APP (used in anti-lost alarm).
Power indicator/alert.
Support anti-hijack password setup, modification, and restoration.
Ultra-low power consumption standby mode -
RFID & Wireless Modules
LoRa Series Ra-02 Spread Spectrum Wireless Module
₹349.00 Add to cartSpecifications:
LoRa â„¢ spread spectrum modulation technology
Super-far-distance communication 15KM
+20dBm-100mW voltage constant when the RF power output
High sensitivity: low to -148dBm
Half duplex SPI communication
Programmable bitrates up to 300kbps
Supports FSK, GFSK, MSK, GMSK, LoRa â„¢ and OOK modulation
127dB RSSI dynamic range
Automatic RF signal detection, CAD models and ultra high-speed AFC
With the CRC, up to 256 bytes of packet engine
Small double stamp hole size SMD package
Shielding shell
IPEX external antenna (Ra-02) -
RFID & Wireless Modules
NRF 24L01 Module Long Range
₹70.00 Add to cartFeatures :
NRF24L01 is a universal ISM band monolithic transceiver chip works in the 2.4-2.5GHz
Wireless transceiver including: Frequency generator, enhanced type, SchockBurstTM, mode controller, power amplifier, crystal amplifier, modulator, demodulator
The output power channel selection and protocol settings can be set extremely low current consumption, through the SPI interface
As the transmit mode, the transmit power is 6dBm, the current is 9.0mA, the accepted mode current is 12.3mA, the current consumption of the power-down mode and standby mode are lower
Built-in 2.4GHz antenna, supports up to six channels of data reception
Size: 15 x 29mm
Low operating voltage: 1.9-3.6V
125 channels, multi-point communication and frequency hopping to meet the communication needs
High Rate: 2Mbps, as air transmission time is very short, greatly reducing collision phenomena in wireless transmission (air transfer rate of software setting: 1Mbps or 2Mbps)
Low power consumption: When the answer mode communication, fast air transmission and start-up time, which greatly reduces the current consumption
Low application cost: NRF24L01 integrated part of all high-speed signal processing related to RF protocol, such as: automatic retransmission of lost packets and automatically generate response signals, etc.
NRF24L01 SPI interface: hardware SPI port, MCU I/O ports
Internal FIFO compatible with a variety of microprocessor interface, micro-controller is convenient -
RFID & Wireless Modules
nRF24L01+PA+LNA Wireless 2.4GHz RF Transceiver Module with SMA Antenna
₹162.00 Add to cartSpecifications:
Operating Voltage: 3.3V
Current Consuption: 115mA
Operating Frequency: 2.4GHz ISM BAnd
Can support upto 6 channles
Operating Range: 1km
Antenna Gain: 2dbi (peak)
Interface: SPI -
RFID & Wireless Modules
SIM 800A GSM Modem with SMA Antenna
₹850.00 Add to cartSpecifications:
This is SIM 800A GSM Modem with SMA Antenna
Quad-band 900/1800 MHz
9V-12V DC Input Power
RS232 Interface for communication
UART & I2C breakouts for microcontroller communication
Can be configured via AT commands
Built-in SIM Card holder and Network Status LED
Comes with an SMA Antenna for better range -
RFID & Wireless Modules
SIM7670C 4G LM137 with Antenna(GSM 4G Foldable)
₹1,895.00 Add to cartSpecifications:
This is SIM7670C 4G LM137 with Antenna(GSM 4G Foldable)- ADIY
SIMCOM A7670C LTE module as the core component
Supports LTE-FDD, LTE-TDD, and GSM frequency bands
Controlled through AT commands for easy integration
Includes a SIM card holder and SMA antenna connector
Equipped with a DC power jack for power supply
Offers RS232 interface for connectivity to computers or microcontrollers -
RFID & Wireless Modules
SIM800L GPRS GSM Module Core Board Quad-band TTL Serial Port with the Antenna – China
₹390.00 Add to cartSpecifications:
Operating Voltage: 3.4-4.4V DC
Peak Current: 2A
TTL serial port for serial port, you can link directly to the microcontroller.
Don’t need MAX232.
The power module automatically boots, homing network.
Onboard signal lights all the way.
It flashes slowly when there is a signal; it flashes quickly when there is no signal.
Please note: Its quality is not stable, not responsible for after-sales. -
RFID & Wireless Modules
SIM900A Wireless GSM GPRS Module with Antenna
₹600.00 Add to cartFeatures:
The onboard two set power supply interface VCC5 5V power supply, VCC4 interface, 3.5–4.5V power supply, optional power on self starting (default) and control start.
The onboard SMA (default) and IPX mini antenna interface, SIM900A interface reserved reset.
The size of the module is 49*50, all the new and original device.
The computer can give early computer debugging USB module power supply,
a very large amount of data under the condition of the recommended current more than 1A.
Standby dozens of MA data can be set to provide dormancy, dormancy of 10MA low power.
The serial port circuit: support for 3.3V single chip microcomputer.
