Sensors and Modules
-
Biomedical Sensor
AD8232 Heart ECG Monitoring Sensor Module Kit for Arduino
₹500.00 Add to cartOperating Voltage: 3.3V
Operating Temp: -40 to 90 °C
Cable Length: 100cm
Leads-Off Detection
Shutdown Pin
LED Indicator
3.5mm Jack for Biomedical Pad Connection -
Motion and Position Sensors
ADXL335 3-axis Analog Output Accelerometer Module
₹550.00 Read moreOperating Voltage: 3V – 5V DC
Sensing Range: ±3g (X, Y, Z axes)
Output Type: Analog (X, Y, Z axis)
Sensitivity: 330mV/g at 3.3V supply
Bandwidth: Selectable via external capacitors
Current Consumption: ~350 µA
Dimensions: Compact size for embedded applications
Applications: Tilt sensing, vibration monitoring, motion tracking, gaming controllers -
Motion and Position Sensors
ADXL345 Triple Axis Accelerometer Board
₹180.00 Add to cartSupply Voltage: 3.3 V or 5V.
Sensitivity: X: 28.6 LSB/g, Y: 31.2 LSB/g, Z: 34.5 LSB/g.
Output data rate (ODR) : 800 Hz
Sensing Range: ±2g, ±4g, ±8g, ±16g. -
Environmental Sensors
Analog TDS Sensor Module
₹320.00 Add to cartWide voltage operation: 3.3~5.5V
0~2.3V analog signal output, compatible with 5V, 3.3V two control systems
The excitation source is an AC signal, effectively preventing probe polarization
Waterproof probe for long-term immersion in water -
Light and Vision Sensors
BH1750 Ambient Light Sensor – GY-302
₹110.00 Add to cartType: GY-302
Operating Voltage (VDC): 3 ~ 5 V
Analog to Digital Converter: Built-in 16-bit
Interface: I2C (Inter-Integrated Circuit)
Data Range: 0 to 65,535 lux
Dimensions (LxWxH): 18x13x3mm -
Environmental Sensors
BMP180 Digital Barometric Sensor Module – Arduino Sensors
₹40.00 Add to cart1.8V to 3.6V Supply Voltage.
I2C interface.
Fully calibrated.
Very low noise – up to 0.02hPa (17cm)
Logic: 3 to 5V compliant
Uses I2C 7-bit address 0x77.
Small and easy to use. -
Environmental Sensors
BMP280 Barometric Pressure and Altitude Sensor Module
₹40.00 Add to cartOperating voltage: 1.7V to 3.6V
Maximum Current: 1.12mA
Temperature range: -40 to +85 deg.C
Pressure range: 300hPa to 1100hPa
Output: SPI and IIC protocol -
Light and Vision Sensors
Color Recognition Sensor Module TCS3200D/TCS2300
₹380.00 Add to cartHigh-resolution conversion of light intensity to frequency.
The pins have 2.54 mm pitch.
Mil-convenient for bitmap board.
Programmable color and full-scale output frequency.
Communicate directly with a microcontroller.
Low-profile surface mount package. -
Electrical Sensors
Current Sensor Module ACS712 20A
₹110.00 Add to cartCurrent sensor chip: ACS712-20A
Operating Voltage (V): 4.5V ~ 5.5V DC
Measure Current Range: -20 ~ +20A
Sensitivity: 100mV/A
Bandwidth: 80 KHz
Total output error: 1.5% at TA = 25 DegC
Length (mm): 32
Width (mm): 13
Height (mm): 14
Weight (gm): 5 -
Electrical Sensors
Current Sensor Module ACS712 30A
₹120.00 Add to cartCurrent sensor chip: ACS712-30A
Operating Voltage (V): 4.5V ~ 5.5V DC
Measure Current Range: -20 ~ +20A
Sensitivity: 100mV/A
Bandwidth: 80 KHz
Total output error: 1.5% at TA = 25 DegC
Length (mm): 32
Width (mm): 13
Height (mm): 14
Weight (gm): 5 -
Electrical Sensors
Current Sensor Module ACS712 5A
₹100.00 Add to cartCurrent sensor chip:ACS712-5A
Operating Voltage (V):4.5V ~ 5.5V DC
Measure Current Range:-5 ~ +5A
Sensitivity:66 to 185 mV/A
Bandwidth:50 KHz
Total output error:1.5% at TA= 25 DegC, and
: 4% at -40 DegC to 85 DegC.
Length (mm) :32
Width (mm) :13
Height (mm) :13.5
Weight (gm): 5 -
Environmental Sensors
DHT11 Temperature And Humidity Sensor Module with LED
₹60.00 Add to cartModel
DHT11
Humidity measurement error
±5%RH
Humidity measurement range
20% ~ 95%RH
Resolution
16 Bit
Supply Voltage
3.3 ~ 5 V
Temperature measurement error
±2°C
Temperature range
0 ~ 50 °C
Length
3.1 cm
Height
0.75 cm
Width
1.4 cm
