Development Board
-
Arduino Compatible Boards
Arduino Mega 2560 R3 Board A16U
₹1,100.00 Add to cartMicrocontroller : ATmega2560
Operating Voltage : 5V
Input Voltage (recommended) : 7-12V
Input Voltage (limit) : 6-20V
Digital I/O Pins : 54 (of which 15 provide PWM output)
Analog Input Pins : 16
DC Current per I/O Pin : 20 mA
DC Current for 3.3V Pin : 50 mA
Flash Memory : 256 KB of which 8 KB used by bootloader
SRAM : 8 KB
EEPROM : 4 KB
Clock Speed : 16 MHz
LED BUILTIN : 13
-
Arduino Compatible Boards
Arduino Pro Mini 5V 16MHz ATMEGA328P compatible
₹195.00 Add to cartMicrocontroller: ATmega328
Circuit Operating Voltage: 5V
Clock frequency: 16MHz.
Digital I/O Pins: 14
8 analog input port: A0 ~ A7.
A pair of TTL level serial port transceiver : RX / TX.
6 PWM port: D3, D5, D6, D9, D10, D11.
Support serial download.
-
ESP8266
D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266
₹230.00 Add to cartMicrocontroller ESP-8266EX
Operating Voltage 3.3 V
Digital I/O Pins 11
Analog Input Pins 1(Max input: 3.2V)
Clock Speed 80MHz/160MHz
Flash 4M bytes
Length 34.2mm
Width 25.6mm
-
ESP32
ESP32 C type Development Board with Wi-Fi and Bluetooth 30Pin
₹400.00 Add to cartSupply Voltage: 5V
GPIO Pins: 30
Connectivity: Bluetooth+WiFi
WiFi frequency: 2.4GHz
USB Type-C connector -
ESP32
ESP32 Development Board with Wi-Fi and Bluetooth 30pins CP2102 driver
₹399.00 Add to cartSupply Voltage: 5V
GPIO Pins: 30
Connectivity: Bluetooth+WiFi
Flash Memory: 4MB (32Mbits)
WiFi frequency: 2.4GHz
USB Micro-USB connector -
ESP32
ESP32 Development Board with Wi-Fi and Bluetooth 38pin version
₹450.00 Add to cartMicrocontroller: ESP32 WROOM-32
Interface: USB Type-C
Serial Chip: CP2102
Operating Voltage: 3.3V
Connectivity: WiFi and Bluetooth
Pin Count: 38 pins
Processor: Dual-core processor
Development: Suitable for IoT and embedded systems development
Compact Design: Small form factor for easy integration
Power Supply: Can be powered via USB or an external power source
Compatibility: Compatible with various development environments and programming languages
Wireless Connectivity: Integrated WiFi 802.11 b/g/n and Bluetooth v4.2 (BLE + Classic)
USB Interface: C-TYPE CP2102 USB-to-UART bridge chip for serial communication
GPIO Pins: 38 pins, including multiple ADC channels, DAC, I2C, SPI, UART, PWM, and touch sensors
Power Consumption: Ultra-low power consumption, < 5 µA in deep sleep mode Programming: Compatible with Arduino IDE, MicroPython, and ESP-IDF
-
ESP32
ESP32-C3 Super Mini USB C-Type Development Board Compact WiFi and Bluetooth Board
₹249.00 Add to cartMicrocontroller ESP32-C3
Core Single-core 32-bit RISC-V
Clock Speed Up to 160 MHz
Flash Memory 4MB
RAM 400 KB SRAM
Wi-Fi IEEE 802.11 b/g/n
Bluetooth BLE 5.0
Power Supply 3.3V (via USB or external power source)
Operating Voltage 3.3V
Temperature Range -40°C to +85°C
-
ESP32
ESP32-CAM WiFi + bluetooth Camera Module Development Board ESP32 With Camera Module OV3660
₹700.00 Add to cartSpecifications:
Power Supply Range: 3.6V to 5V
Bluetooth: 4.2 BR / EDR and BLE standards
Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
Custom IO Port: 9
Low-power dual-core 32-bit CPU for application processors
RAM: 520KB SRAM +4M PSRAM
Up to 240MHz, up to 600 DMIPS
Built-in 520 KB SRAM, external 4M PSRAM
UART Baudrate: Default 115200 bps
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Operating Temperature (°C): -20 to 80
Support OV2640 and OV7670, OV3660 cameras with built-in flash
Support for images WiFI upload
Support TF card
Camera with module comes as per available stock: OV2640, OV7670, OV3660
Base module make also random like Espressif or any other generic make, as per available stock, but it will work properly.
-
ESP32
ESP32-S3-1 N16R8 Development Board TYPE C
₹800.00 Add to cartMemory: 16 MB of Flash memory, 8 MB of SRAM.
Usage: General-purpose module for a wide range of applications.
Features: Standard configuration for many applications needing moderate memory and processing power.
-
Arduino Compatible Boards
Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)
₹212.00 Add to cartSpecifications:
Operating Voltage (logic level): 5V
With Soldered Connector
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX, RX, D2 ~ D13
1 pair of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is a bootloader installed in it
Standard 0.1” spacing DIP (breadboard friendly).
Manual reset switch.
-
ESP8266
NodeMCU ESP8266 CP2102
₹244.00 Add to cartLowest cost WI-FI
Integrated low power 32-bit CPU
Arduino-like hardware IO
Upload codes from the Arduino IDE
Wi-Fi Module – ESP-12E module similar to ESP-12 module but with 6 extra GPIOs.
USB – micro USB port for power, programming and debugging
Headers – 2x 2.54mm 15-pin header with access to GPIOs, SPI, UART, ADC, and power pins
Flash Memory(Mb):4
Support:SDIO 1.1/2.0, SPI, UART
Length (mm):49
Width (mm):24
Height (mm):13
Weight (gm):8
Misc – Reset and Flash buttons
Power – 5V via micro USB port
Dimensions – 49 x 24.5 x 13mm -
Raspberry Pi
Raspberry Pi 4 Model B 1GB RAM Board
₹5,200.00 Add to cartSpecifications
Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
2GB, 4GB or 8GB LPDDR4-3200 SDRAM (depending on model)
2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
Gigabit Ethernet
2 USB 3.0 ports; 2 USB 2.0 ports.
Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
2 × micro-HDMI ports (up to 4kp60 supported)
2-lane MIPI DSI display port
2-lane MIPI CSI camera port
4-pole stereo audio and composite video port
H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
OpenGL ES 3.1, Vulkan 1.0
Micro-SD card slot for loading operating system and data storage
5V DC via USB-C connector (minimum 3A*)
5V DC via GPIO header (minimum 3A*)
Power over Ethernet (PoE) enabled (requires separate PoE HAT)
Operating temperature: 0 – 50 degrees C ambient
* A good quality 2.5A power supply can be used if downstream USB peripherals consume less than 500mA in total. -
Raspberry Pi
Raspberry Pi Pico
₹350.00 Add to cartSpecifications:
RP2040 microcontroller chip designed by Raspberry Pi
Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
264KB of SRAM, and 2MB of onboard Flash memory
26 × multi-function GPIO pins
2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
Temperature sensor -
STM Boards
STM32F103C8T6 Minimum System Board – Blue Pill | STM32 Core
₹160.00 Add to cartMCU: Powerful STM32F103C8T6
Performance: 72MHz work frequency
Memory: 64K flash memory, 20K SRAM
Voltage: 2.0-3.6V power, I/O
USB: Onboard Micro USB interface
Core: ARM Cortex-M3 32-bit CPU
Debug: SWD Mode support
Size: Compact 54mm x 22mm
Weight: Light at only 9g
-
Arduino Compatible Boards
Uno R3 CH340G ATmega328p Development Board – Compatible with Arduino (Without Cable)
₹220.00 Add to cartATmega328P based development board compatible with Arduino IDE.
