Shop
-
Touch Sensor
TTP223 1 Channel Capacitive Touch Sensor Module Blue
₹20.00 Add to cartPower supply voltage(VCC): 2.0, 3, 5.5 V.
Output high VOH: 0.8VCC V
Output low VOL: 0.3VCC V
Response time (touch mode) : 60 mS
Response time (low power mode) : 220 mS
Can replace the traditional touch of a button
Four M2 screws positioning holes for easy installation -
Touch Sensor
TTP223 Capacitive Single Touch Sensor Module (Red)
₹9.00 Add to cartOperating Voltage: 2V to 5.5V
No. of channel: 1
Output high: 0.8*Vcc
Output low: 0.3*Vcc
Response time: 220mS
Trigger setting mode: (1- > Short ; 0- > No Short)
AB=00:No-lock High TTL level outputAB=01:Self-lock High TTL level output
AB=10:No-lock Low TTL level output
AB=11:Self-lock Low TTL level output
-
Motor Driver
ULN2003 Stepper Motor Driver Module
₹65.00 Add to cart7 high-voltage and high current Darlington pairs
50V and 500mA for each pair
Input pins triggering voltage: 5V
All seven Output pins can be connected to gather to drive loads up to 3.5A
Low cost and Reliable -
Distance and Proximity Sensors
Ultrasonic Sensor HCSR-04
₹80.00 Add to cartWorking Voltage : 5V (DC)
Output Signal : 5V
Sensor Angle : Less than 15 Degrees
Detection Distance : 2 cm to 450 cm
Input Trigger Signal : 10µs TTL impulse
Echo Signal : Output TTL PWL Signal
Theoretical Measuring Distance : 2cm to 450cm
Practical Measuring Distance : 2cm to 80cm
Accuracy : 3mm
Measuring angle covered : <15° Operating Current : <15mA Operating Frequency : 40Hz High sensitivity ultrasonic range sensor Works with Arduino board -
Arduino Compatible Boards
Uno R3 CH340G ATmega328p Development Board – Compatible with Arduino (Without Cable)
₹229.00 Add to cartATmega328P based development board compatible with Arduino IDE.
-
Motion and Position Sensors
Vibration Sensor Module (SW-420)
₹50.00 Add to cartOperating Voltage: 3.3V to 5V DC
Operating Current: 15mA
Using SW-420 normally closed type vibration sensor
LEDs indicating output and power
It uses wide voltage LM393 comparator
Output format: digital switching output (0 and 1) -
Electrical Sensors
Voltage Sensor Module 0-25V
₹25.00 Add to cartInput Voltage range: DC 0 to 25 V
Voltage detection range: DC 0.02445 V to 25 V
Analog Voltage resolution : 0.00489 V
Dimensions: 28 x 14 x 13 mm(LxWxH).
Weight: 4 gm. -
Motion and Position Sensors
Water Flow Sensor YF-S201
₹160.00 Add to cartSpecifications:
Model: YF-S201
Sensor Type: Hall effect
Working Voltage: 5 to 18V DC (min tested working voltage 4.5V)
Max current draw: 15mA @ 5V
Output valve Size: 20mm
Output Type: 5V TTL
Working Flow Rate: 1 to 30 Liters/Minute
Working Temperature range: -25 to +80℃
Working Humidity Range: 35%-80% RH
Accuracy: ±10%
Maximum water pressure: 1.75 MPa
Output duty cycle: 50% +-10%
Output rise time: 0.04us
Output fall time: 0.18us
Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min)
Pulses per Liter: 450
Durability: minimum 300,000 cycles -
Environmental Sensors
Water Level Depth Sensor Module
₹30.00 Add to cartWorking Voltage : DC 3-5V
Working Current : <20mA Sensor Type : Analog Detection Area : 40 mm x 16 mm Size : 65 mm x 20 mm x 8 mm Humidity: 10% -90% non-condensing -
Buck Converter (Step-down)
XL4016 Step Down Buck Converter (300W 10A Power Supply Module)
₹320.00 Add to cartSpecification
Maximum Power Output: 300W
Maximum Current Supply: 10A
Output Voltage Range: 1.2Vdc to 30Vdc
Step Down (Buck) Converter
Adjustable Output Voltage -
Boost Converter (Step up)
XL6009 DC – DC Step-up converter performance ultra LM2577 booster circuit board
₹60.00 Add to cartFeatures:
Module Properties: Non-isolated boost (BOOST)
Rectification: Non-Synchronous Rectification
Input Voltage Range: 3V ~ 32V
Output Voltage Range: 5V ~ 35V (Note: If you want to get the max voltage, you should make the input current as least 3A)
Input Current: 4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.)
Conversion efficiency: <94% (greater the pressure, the lower the efficiency) Switching frequency: 400KHz Output Ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple) Load Regulation: ± 0.5% Voltage Regulation: ± 0.5% Operating Temperature: -40 ? ~ +85 ? Dimensions: 43mm * 21mm * 14mm (L * W * H) -
Electrical Sensors
ZMPT101B AC Single Phase Voltage Sensor Module
₹130.00 Add to cartHigh precision onboard miniature voltage transformer
AC voltage measurement up to 250V
High accuracy and consistency
Onboard precision op-amp circuit for signal sampling
Adjustable analog output
Small size, lightweight, and easy PCB mounting
Suitable for open-source platforms (Arduino, ESP8266, Raspberry Pi)
Operating temperature: -40°C to +70°C
