Shop
-
Resistors
910K Ohm Resistor 1/4W Through Hole Carbon Film
₹1.00 Add to cart910K Ohm 1/4W carbon film resistor with through-hole mounting. Suitable for current limiting, voltage division, signal conditioning, prototyping, and general-purpose electronic circuits.
-
Resistors
910K Ohm Resistor 1W Through Hole Carbon Film
₹3.00 Add to cart910K Ohm 1W carbon film resistor with through-hole mounting. Suitable for current limiting, voltage division, signal conditioning, prototyping, and general-purpose electronic circuits.
-
Resistors
91K Ohm Resistor 1/2W Through Hole Carbon Film
₹2.00 Add to cart91K Ohm 1/2W carbon film resistor with through-hole mounting. Suitable for current limiting, voltage division, signal conditioning, prototyping, and general-purpose electronic circuits.
-
Resistors
91K Ohm Resistor 1W Through Hole Carbon Film
₹3.00 Add to cart91K Ohm 1W carbon film resistor with through-hole mounting. Suitable for current limiting, voltage division, signal conditioning, prototyping, and general-purpose electronic circuits.
-
Motor Driver
A4988 Stepper Motor Driver
₹80.00 Add to cartSupply Voltage : 8-35 VDC.
Current : 1.0A (no heatsink ).
Current : 2.0A (with heat-sinking).
logic input : 3 – 5.5V . -
Biomedical Sensor
AD8232 Heart ECG Monitoring Sensor Module Kit for Arduino
₹500.00 Add to cartOperating Voltage: 3.3V
Operating Temp: -40 to 90 °C
Cable Length: 100cm
Leads-Off Detection
Shutdown Pin
LED Indicator
3.5mm Jack for Biomedical Pad Connection -
Motion and Position Sensors
ADXL335 3-axis Analog Output Accelerometer Module
₹550.00 Read moreOperating Voltage: 3V – 5V DC
Sensing Range: ±3g (X, Y, Z axes)
Output Type: Analog (X, Y, Z axis)
Sensitivity: 330mV/g at 3.3V supply
Bandwidth: Selectable via external capacitors
Current Consumption: ~350 µA
Dimensions: Compact size for embedded applications
Applications: Tilt sensing, vibration monitoring, motion tracking, gaming controllers -
Motion and Position Sensors
ADXL345 Triple Axis Accelerometer Board
₹180.00 Add to cartSupply Voltage: 3.3 V or 5V.
Sensitivity: X: 28.6 LSB/g, Y: 31.2 LSB/g, Z: 34.5 LSB/g.
Output data rate (ODR) : 800 Hz
Sensing Range: ±2g, ±4g, ±8g, ±16g. -
Environmental Sensors
Analog TDS Sensor Module
₹320.00 Add to cartWide voltage operation: 3.3~5.5V
0~2.3V analog signal output, compatible with 5V, 3.3V two control systems
The excitation source is an AC signal, effectively preventing probe polarization
Waterproof probe for long-term immersion in water -
Flight Controllers
APM 2.8 Flight Controller with Built in Compass
₹6,800.00 Add to cartSpecifications :
Straight Needle
Arduino Compatible!
Onboard 4 MegaByte Dataflash chip for automatic data logging.
Optional off-board GPS, a uBlox LEA-6H module with Compass.
One of the first open source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000.
Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively. -
Arduino Compatible Boards
Arduino Mega 2560 R3 Board A16U
₹1,100.00 Add to cartMicrocontroller : ATmega2560
Operating Voltage : 5V
Input Voltage (recommended) : 7-12V
Input Voltage (limit) : 6-20V
Digital I/O Pins : 54 (of which 15 provide PWM output)
Analog Input Pins : 16
DC Current per I/O Pin : 20 mA
DC Current for 3.3V Pin : 50 mA
Flash Memory : 256 KB of which 8 KB used by bootloader
SRAM : 8 KB
EEPROM : 4 KB
Clock Speed : 16 MHz
LED BUILTIN : 13 -
Arduino Compatible Boards
Arduino Pro Mini 5V 16MHz ATMEGA328P compatible
₹220.00 Add to cartMicrocontroller: ATmega328
Circuit Operating Voltage: 5V
Clock frequency: 16MHz.
Digital I/O Pins: 14
8 analog input port: A0 ~ A7.
A pair of TTL level serial port transceiver : RX / TX.
6 PWM port: D3, D5, D6, D9, D10, D11.
Support serial download.
